SKU:
ds_FBLH_42041
UPC:
00086923420415
Air Conditioning:
Yes
Automatic Transmission - Column:
No
Automatic Transmission - Floor:
Yes
Baffled:
No
Bolts/Studs Included:
Yes
California Proposition 65:
WARNING: Cancer & Reproductive Harm. For more info visit www.P65Warnings.ca.gov
Collector Bolts Included:
Yes
Collector Size:
3 in.
Collector Style:
BALL and SOCKET Style (Gasketless)
Crank Shaft Wiper Included:
No
Cylinder Head:
Factory Style
Dipstick Port:
No
Drain Plug Included:
Yes
Drivetrain:
2WD
Emissions Notes:
Not Legal For Street Use on '75-Later Model Years! Legal for off-road use only.
Engine:
Chevy LS Series
Exhaust System Dia:
2-1/2 in.
Fastener(s) Included:
Yes
Finish:
Uncoated Headers
Flange Thickness:
0.375 in.
Gasket Or Seal Included:
Yes
Hedman Hedders Included:
69710
IMPORTANT!:
Some LS have dipstick in pan and will require drilling of dipstick port on block
Installation Hardware Included:
Yes
Installation Notes:
Pan has -10AN inlet / outlet ports, and requires relocation of the oil filter.
Kicked Out:
No
Manual Transmission - Column:
No
Manual Transmission - Floor:
Yes
Material:
Mild Steel
Motor Mounts Included:
Yes
Mounting Hardware Included:
Yes
MPN:
42041
Note:
1967-1972 Chevrolet C10 Pickup 4.8 Liter, 1967-1969 Chevrolet C10 Pickup 5.3 Liter, 1967-1972 Chevrolet C10 Suburban 4.8 Liter, 1967-1969 Chevrolet C10 Suburban 5.3 Liter, 1967-1972 Chevrolet C20 Pickup 4.8 Liter, 1967-1969 Chevrolet C20 Pickup 5.3
O2 Provision:
No
O2 Sensors Included:
No
Oil Pan Bolts Included:
Yes
Oil Pan Capacity:
5 Qt. Capacity
Oil Pan Depth (in):
2 in. at front of Pan; 6 in. at Rear Sump
Oil Pan Included:
Yes
Oil Pan Material:
Steel
Oxygen Sensor Bung Included:
No
Package Contents:
Headers; Engine Mounts; Transmission Crossmember; Oil Pan; Hardware and Gaskets
Pickup #:
2522
Pickup Included:
Yes
Port Shape:
Round
Power Steering:
Yes
Primary Tube Diameter (in):
1.75 in.
Primary Tube Gauge:
16g
Product Type:
Complete SWAP-IN-A-BOX Kits
Reducer Outlet Diameter:
2-1/2 in.
Reducer Outlet Size:
2-1/2 in.
Reducers Included:
Yes
Replacement Gasket:
27470
Replacement Head Flange Gasket:
Yes
Replacement Motor Mount Kit:
4204
Replacement Mount Pads:
4719
Replacement Oil Pan:
1108
Sump Dimensions:
6 in. Deep x 8.25 in. Wide x 7 in. Long
Sump Location:
Rear
Sump Style:
Wet Sump
Title:
TRANS-DAPT PERFORMANCE PRODUCTS SWAP IN A BOX KIT-LS ENGINE INTO 67-72 2WD CHEVY/GMC TRUCKS AUTOMATIC TRANSMISSION WITH UNCOATED, MILD STEEL HEADERS
Transmission Compatibility:
4L60E
Transmission Mount Type:
Crossmember
Transmission Mount/Crossmember Included:
6420
Transmission Type:
Automatic Transmission
Tube Design:
MID-LENGTH
Tube Diameter:
1-3/4 in.
Tube Length:
Mid-Length Tubes
Tube Size:
1-3/4 in.
Tube Style:
Mid-Length
Tuned:
No
Variations:
42041, 42042, 42043.
Welding Required:
No
Wheel Drive Type:
2WD
Windage Tray Included:
No
with A.I.R. System:
No
with EGR:
No
Y-Pipe Included:
No